CZ series standard chemical process pump is horizontal, single stage, single suction, radial profile separation heart pump. Its size and performance meet the standard of 1S02858.
The specification of 150,400 and above is unique to the CZ pump.
The pressure on the at the shaft seal are balanced by the balance hole on the side blade or the impeller.
Shaft seal can be packed or mechanical seal, such as single or double seal, with a variety of sealing systems,The rear door structure and the lengthened coupling design can remove the whole rotor without removing the pump body and motor during maintenance, flange inlet and outlet flange pressure levels have the same design level.
Design standard is 2.5mpa, or 1.6mpa or ANSI150#
CZ standard chemical process titanium pump structural drawing
1-Pump Body 2-The impeller nut 3-Shaft 4-Impeller 5-Pump cover 6-Shaft sleeve 7.Mechanical seal 8-Jacket 9-Double end studs 10-Hexagonal nut 11-Machine sealing gland 12- Bearing box assembly 13-Front axle pressure cover 14-Cylindrical roller bearings 15-Spring retainer for hole 16-Ball contact bearing 17-Rear bearing pressure cover
CZ standard chemical process titanium pump performance range (50HZ)
CZ standard chemical process titanium pump performance sheet
DN: 32~ 300mm
P: ~ 2.5MPa
Organic and inorganic acids such as nitric acid, sulfuric acid, hydrochloric acid and phosphoric acid.
Sodium hydroxide or sodium carbonate, etc. alkaline solution. salt solution.
Liquid petrochemical products, organic compounds and other corrosive raw materials and products.
It is widely used in chemical and petrochemical/industrial refinery/paper mill and pulp mill/production equipment of sugar industry.