Home / Company News / Recommendations for welding titanium plates and titanium alloy plates

Recommendations for welding titanium plates and titanium alloy plates

Titanium plate density: 4.51, color and stainless steel plate is basically the same, but the weight is only equivalent to more than half of stainless steel.Currently, the normal size of titanium plate produced in China is 0.8-30mm thick, 2m long and 1m wide.

One Surface requirements for titanium plate welding

  1. 1. No scale;

  2. 2. No cracks;

  3. 3. The thickness between butt welds shall not exceed 3mm.

Two Environmental requirements for titanium plate welding

  1. 1. The temperature of the welding room should be between 5-30℃;

  2. 2. The welding room must be clean and dust-free, and maintain a dry environment;

  3. 3. Titanium plate shall be used for protective cover as far as possible.

Three Welding wire for titanium plate welding

  1. 1, welding wire requires pickling surface;

  2. 2, welding wire to no cracks, no oxidation, it is best to use the same as the parent material blank material.

Four Argon protection requirements for titanium plate welding

  1. 1. There should be three layers of protection in the welding process, namely, the upper layer, the lower layer and the welding gun with argon gas.

  2. 2. The upper and lower layers shall follow the image area of the welding torch to protect argon gas at high temperature and prevent oxidation.

  3. 3. The purity of argon is generally 99%.


Rowlyn

PRODUCTS & SERVICE

QUICK CONTACT
  info@rowlyn.com
 00 86 917 8999 589
  Eastern High-tech Industrial Zone, 
Baoji, CHINA

GET OUR LATEST UPDATES

© 2019 Baoji Rowlyn Metal Materials Co., Ltd. All Rights Reserved.  
Powered by BRAIN.