Home / Company News / What are the advantages of titanium screws

What are the advantages of titanium screws

What are the advantages of titanium screws?What are the advantages of titanium screw? In the process of alkali washing titanium alloy rod, the lye is constantly taken away or evaporated by the workpiece, so it is necessary to add lye, timely adjustment, so that the lye composition remains relatively stable.During alkaline washing of titanium screws, insoluble oxide slag precipitates in the bottom of the tank, which affects the good thermal conductivity of the tank. Moreover, due to the gap caused by precipitation, electrochemical corrosion can easily occur in the steel tank, greatly shortening its service life.Titanium screw, the sediment should be cleaned in time.Using a movable trough bottom to collect residuum is often taken.When removal of sediment is required, the bottom of the active trough is simply lifted away.

Yield strength is the yield limit of metal materials when the phenomenon of yield occurs, that is, the stress resisting the micro plastic deformation.What are the advantages of titanium screw? For metal materials without obvious yield phenomenon, the stress value producing 0.2 residual deformation is specified as its yield limit, which is called conditional yield limit or yield strength.

More than the yield strength of the external force, will make the parts failure, unable to recover.Titanium screw advantage features what, such as low carbon steel yield limit for 207MPa, when greater than this limit under the action of external forces, parts will produce deformation, less than this, parts will return to the original appearance.

  1. (1) for materials with obvious yield phenomenon, the yield strength is the stress at the yield point (yield value);

  2. (2) for materials with no obvious yield phenomenon, the stress when the limit deviation of the linear relationship with stress-strain reaches the specified value (usually the original scale of 0.2).Titanium screw advantage characteristics, usually used as a solid material mechanical properties of the evaluation index, is the actual use of the material limit.Because the stress exceeds the yield limit of the material, resulting in necking and strain increase, the material is damaged and cannot be used normally.

What are the advantages and characteristics of titanium screw, titanium rod manufacturers when the flow of titanium rod filter operation is too large, easy to cause the blocking of filter parts, in order to avoid this situation, we must know more about the use of titanium rod filter.Titanium screw, the use of titanium rod filter should be in accordance with the rated pressure standard operation, must not be rushed to adjust the size of the pressure, so as to ensure the use of stable flow.After skilled operation of titanium screws, the cleaning method of titanium rod filter should also be mastered. The cleaning time should be controlled, not too long or too short, and the sterilized solution should be prepared for repeated cleaning according to the use requirements of titanium rod filter.

Titanium screw, when we use the place of screw in life is really a lot of, but the understanding of titanium alloy screw is the hard truth, or choose to poor quality products on the reaction.So when choose and buy should look for the businessman that manages titanium alloy screw to choose goods greatly.For parts like screws that undergo high strength, I recommend not using aluminum, which is easy to take off, but solid titanium screws.What are the advantages of titanium screw, titanium alloy screw in addition to its hardness in stainless steel, the finished product produced in weight performance is also much lighter than ordinary stainless steel screw.In addition, the thread of titanium alloy screw and nut is hard, the wear resistance performance may be higher than general stainless steel, titanium screw, in addition to not easy to slide teeth, titanium alloy screw itself material stability is also very high, with a good oxidation resistance.Some titanium alloy screw hardness difference is big, so titanium alloy screw must use good material can, titanium alloy screw has steel hardness.

What are the advantage in titanium screws, titanium and titanium alloy wire production at home and abroad mainly USES is drawn, grinding, annealing, acid and alkali wash, scale cutting, straightening process, such as in the whole process need twenty control time, three to four times between grinding, 10 intermediate annealing, two to three times of acid and alkali washing process, the straightening process, etc.Titanium screw, under the condition of high temperature heating through the hole model control wire diameter, straight wire processing is difficult, surface accuracy is poor, hydrogen and oxygen absorption is serious, single plate weight is low, can not meet the requirements of high precision titanium;Acid and alkali cleaning surface has a lot of pollution, titanium screws, only acid cleaning titanium surface, and can not produce bright titanium.Straightening process will make the surface of titanium material form irreconcilable straightening lines, making the surface damage of titanium material more serious.



Rowlyn

PRODUCTS & SERVICE

QUICK CONTACT
  info@rowlyn.com
 00 86 917 8999 589
  Eastern High-tech Industrial Zone, 
Baoji, CHINA

GET OUR LATEST UPDATES

© 2019 Baoji Rowlyn Metal Materials Co., Ltd. All Rights Reserved.  
Powered by BRAIN.