MVR riser evaporator,
After preheating, the feed liquid enters the evaporator from the bottom, and the heated steam condenses outside the tube. After the solution is heated, it vaporizes rapidly, and the secondary steam generated rises at a high speed in the tube. The material liquid is pulled to the inner wall of the tube and evaporates continuously. The vapor and liquid are separated at the top of the separator. The compressor compresses the secondary steam as heating steam and transfers it to the shell side of the heat exchanger for the heat source of the evaporator. Continuous evaporation process is realized.
1. High heat transfer efficiency;
2. Low energy consumption;
3. Low requirement of plant height for equipment
Scope of application:
The rising film evaporator is suitable for small evaporation, high plant height, heat sensitive and foaming solution, and is not suitable for solution with high viscosity, easy scaling or crystallization.