Home / Company News / Price and specification of titanium alloy sheet

Price and specification of titanium alloy sheet

In our life appeared a lot of new products, one of the most recognized products is now titanium alloy plate.Titanium alloy plate is mainly composed of titanium, and there are other elements added.Titanium alloy plate not only has the density is very low, very high strength, corrosion resistance is very strong, and has a technology very good characteristics of titanium alloy plate, titanium plate in the aviation industry is now often use, then small make up will give you details about the knowledge of the titanium alloy plate, hope our share content are helpful to you.

Titanium alloy plate price

Titanium alloys are alloys based on titanium with other elements.Titanium has two kinds of homogeneous and heterogeneous crystals: titanium with dense hexagonal structure below 882℃, titanium with body centered cubic above 882℃.

Technical requirements:

  1. 1: the chemical composition of titanium and titanium alloy plates shall comply with the provisions of GB/T 3620.1. When the buyer reinspects, the allowable deviation of the chemical composition shall comply with the provisions of GB/T3620.2.

  2. 2: the allowable deviation of plate thickness shall comply with the provisions in table 1.

  3. 3. The allowable deviation of plate width and length shall comply with the provisions in table 2.

  4. 4: every Angle of the plate shall be cut into right angles as far as possible

  5. High quality TC4 titanium alloy rod corrosion resistant medical titanium alloy light rod, price 330 yuan

  6. High purity ot4-0 pure titanium plate, price 390 yuan

  7. Baoji TC4 titanium alloy plate titanium plate titanium thick plate, price 300-460 yuan

  8. (price source network, for reference only)

  9. Titanium alloy plate production specifications

  10. T 0.5-1.0mm x W1000mm x L 2000-3500mm

  11. T 1.0-5.0mm x w1000-1500mm x L 2000-3500mm

  12. T 5.0-30mm x w1000-2500mm x L 3000-6000mm

  13. T 30-80mm x W1000mm x L 2000mm

Technical requirements for titanium alloy plates

  1. 1: the chemical composition of titanium and titanium alloy plates shall comply with the provisions of GB/T 3620.1. When the buyer reinspects, the allowable deviation of the chemical composition shall comply with the provisions of GB/T 3620.2.

  2. 2: the allowable deviation of plate thickness shall comply with the provisions in table 1.

  3. 3. The allowable deviation of plate width and length shall comply with the provisions in table 2.

  4. 4: every Angle of the plate shall be cut into right angles as far as possible

alloying

Titanium alloys are alloys based on titanium with other elements.Titanium has two kinds of homogeneous and heterogeneous crystals: titanium with dense hexagonal structure below 882℃, titanium with body centered cubic above 882℃.

Alloying elements can be divided into three categories according to their effects on phase transition temperature:

  1. (1) stable phase, increase phase transition temperature elements for stable elements, such as aluminum, carbon, oxygen and nitrogen.Aluminum is the main alloying element of titanium alloy, which has obvious effects on increasing the strength at room temperature and high temperature, reducing specific gravity and increasing the elastic modulus of the alloy.

  2. (2)The elements stabilizing the phase transition and decreasing the phase transition temperature are stable stable elements, which can be divided into two types: isomorphic and eutectoid.The product of titanium alloy was applied

  3. The former has molybdenum, niobium, vanadium, etc.The latter has chromium, manganese, copper, iron, silicon and so on.

  4. (3)The elements that have little effect on phase transition temperature are neutral elements, such as zirconium and tin.

Oxygen, nitrogen, carbon and hydrogen are the main impurities in titanium alloys.The solubility of oxygen and nitrogen in the phase was higher than that in the phase, which strengthened the titanium alloy, but reduced the plasticity.Generally, the content of oxygen and nitrogen in titanium is less than 0.15 ~ 0.2% and 0.04 ~ 0.05% respectively.Hydrogen has little solubility in the solid phase, and too much hydrogen dissolved in titanium alloys produces hydrides that make the alloy brittle.Usually the hydrogen content in titanium alloy is controlled below 0.015%.The dissolution of hydrogen in titanium is reversible and can be removed by vacuum annealing.

Above is a detailed share of the basic knowledge of titanium alloy plate, we hope that you can through our sharing content can better understand the knowledge of titanium alloy plate.Titanium alloy plate is becoming more and more important in our life, and the role of titanium alloy plate in our aerospace industry is very big.Titanium alloy plate performance is stable, can not prevent oxidation, and titanium alloy plate also has a very strong corrosion resistance, titanium alloy plate is very many types, but you can choose and buy according to their own needs oh.


Rowlyn

PRODUCTS & SERVICE

QUICK CONTACT
  info@rowlyn.com
 00 86 917 8999 589
  Eastern High-tech Industrial Zone, 
Baoji, CHINA

GET OUR LATEST UPDATES

© 2019 Baoji Rowlyn Metal Materials Co., Ltd. All Rights Reserved.  
Powered by BRAIN.